The placement of the WiFi device is very important for stable and strong connectivity. Even if you are using any extender. But placing the extender in the wrong spot can cause slow speeds and weak signals.
In this article, we will talk about the 5 worst places to put your extender. Avoid these places and get the best results from your Wavlink AC1200 Extender setup.
1. Inside a Cabinet or Closet
Many people think hiding devices will make their home look neat. But putting your Wavlink AC1200 Extender inside a cabinet or closet is a bad idea. Wi-Fi signals need open space to travel. Thick walls and doors block the signals, making your connection weak.
Tip: Always place your extender out in the open. The fewer walls between the extender and your devices, the better the connection will be.
2. Too Close to the Main Router
It might seem smart to put the extender right next to your main router. After all, it will get a strong signal, right? Not really. If your Wavlink AC1200 Extender is too close to the router, it will not extend the router’s signals.
Tip: During the Wavlink setup, place the extender halfway between your router and the area where you face with weak Wi-Fi. This way, it picks up a strong signal and pushes it further into your home.
3. Near Metal Objects or Appliances
Do not place the extender near metal objects like refrigerators, ovens, or even washing machines. It will be a big mistake. Metal blocks Wi-Fi signals and can cause interference. The same goes for microwaves and cordless phones, which use similar frequencies.
Tip: Keep your Wavlink AC1200 Extender at least a few feet away from metal surfaces and large electronic devices. A clear, open area will give you the strongest signal.
4. In a Basement or Garage
Basements and garages often have thick concrete walls and floors, which are terrible for Wi-Fi. Even if your extender is strong, these barriers will weaken the signal badly. Many basements also have lots of pipes and wires that cause more interference.
Tip: For a good Wavlink AC1200 Extender setup, place the device on the main floor, closer to where you actually use your internet devices like phones, laptops, or smart TVs.
5. Near Windows
You might think placing your Wavlink AC1200 Extender near a window will help spread the signal further. But in most cases, the signal will just go outside, wasting your internet power. Plus, windows don’t reflect Wi-Fi well, causing weak indoor coverage.
Tip: Keep your extender inside the home, close to hallways or central rooms, where it can spread the signal evenly across different areas.
Bonus Tips for a Perfect Wavlink Setup
Here are some bonus tips that help you to do a perfect Wavlink setup:
After plugging in your Wavlink extender, go to a web browser and type 192.168.10.1 to start the Wavlink setup easily.
Most extenders have LED lights that show if the signal is strong. Green usually means good and red means bad.
Sometimes updating the extender’s firmware can improve performance.
Corners and dead-end spaces trap the signal. Keep the extender in open areas instead.
Following these small tips will make your internet connection much stronger.
Conclusion
After reading the above article, you understand how the correct placement of the extender is important for strong WiFi signals. A good Wavlink AC1200 Extender setup means, finding a balanced and open space where the signal can travel freely.
