How to Setup Wavlink HALO Pulse X2 Mesh System?

The Wavlink HALO Pulse X2 is the WiFi mesh system consisting of a router and extender, providing high-speed internet speed that covers up to 3200 sq. ft. area. You can connect up to 256 devices with this mesh system. If you are looking for the best guide that will help you set up the Wavlink mesh system, then you are at the right place. Here in this blog, we discuss in detail how to complete Wavlink router setup at home.

Physical Installation

To use the HALO Pulse X2 mesh system, you need to install it physically first. After that, configure it. Steps to install:

First position the Wavlink mesh router to the centered location of the house.
Then attach the router to the modem with the help of an Ethernet cable.
Use the power adapter to give the power to the router.
Once the power is turned on, then configure it by using a web browser or mobile app.
If your house is large, then connect child units (extenders) to it using an Ethernet cable.
You can also connect the child unit wirelessly.

In this manner, you can complete the physical setup of the Wavlink HALO Pulse X2 mesh system.

Connect Extender Wirelessly

To connect the child unit (extender) wirelessly, follow the steps given below. Some users do not know how to connect extenders wirelessly. But don’t worry, here we provide a complete guide:

First place the child unit along with the router.
Power up the unit and router also.
Then press the WPS button of the router first.
After a few seconds push the button of the extender.
Wait until the light on both devices gets solid or stable.

When the light becomes solid your router is connected to the extender successfully. After this configure all the devices.

Configuration

After completing all the installation and connections, configure the Wavlink devices using the steps given below:

First, attach the computer device to the Wavlink network.
Launch the web browser on the computer, and put ap.setup or IP 192.168.10.1 into the address bar.
After this, it will ask for login details, fill in the default login detail into the login field.
Once you complete the login details, enter the web interface of Wavlink.
Here you can perform different tasks on the Wavlink devices.

Note- See the default login details on the label and user manual of the Wavlink HALO Pulse X2 mesh router.

Conclusion

After reading the above blog, hope you understand all about the Wavlink HALO Pulse X2 mesh router, and how to setup it, and connect child units (extenders) to the Wavlink mesh router.