If you want to sync your Orbi router with the satellite, there are two main methods: using the Sync button or the Ethernet backhaul method. Once synced, you can configure the devices either through the app or your computer.
1. Connect Your Orbi Router to the Home Network
Start by connecting the Orbi router to your home network's modem using an Ethernet cable. Plug the cable into the router's WAN (yellow) port and the modem's LAN port. After connecting the cables, power on the devices, and you're ready to sync the router with the satellites.
2. Sync Your Orbi Router with Satellite Nodes
There are two ways to sync the router with the satellites: using the Sync button or through Ethernet backhaul.
Using the Sync Button
Locate the Sync button on both your router and satellites. Press the button on each device once. After a brief wait, the devices will automatically sync with each other. Once synced, you can proceed with device configuration either through the app or the Orbi login interface.
Ethernet Backhaul Method
Alternatively, you can use Ethernet cables to connect the router to the satellites. First, connect one Ethernet cable between the router’s LAN port and the satellite. Then, connect another cable from the router’s LAN2 port to the satellite. This method will also allow you to configure your devices easily.
3. Configure Your Router and Satellites
There are two ways to set up your Orbi router and satellites: through the Orbi app or the Orbi login page on your computer.
Using the Orbi App
The Orbi app is available for download on the Play Store, App Store, and the Netgear support website. To use the app, log in with the admin credentials, which can be found on the router and satellite labels or in the user manual. With the app, you can manage essential settings like creating your Orbi network, registering your device on the MyNETGEAR portal, and changing your admin password. During the setup process, the app will prompt you to create a network, and you'll reach the "Create Network" page.
Using Orbilogin.net
To configure your Orbi system via your computer, connect it to the Orbi network. Open your web browser and enter the Orbi login address: orbilogin.net, orbilogin.com, or the IP address 192.168.1.1. After pressing Enter, you'll be directed to the login page, where you’ll need to input the admin credentials (username and password) found on your Orbi device label or in the manual. Once logged in, you’ll be taken to the dashboard, where you can manage settings.
Conclusion
This guide has outlined the steps to sync and configure your Orbi router and satellite. Whether using the Sync button, Ethernet backhaul, the Orbi app, or the login page, you can easily set up your Orbi mesh system without requiring additional support.
